The average cost to replace a roof in Decatur is often higher than online estimators suggest.
Local labor rates in Decatur currently trend at 0.974x the national average.
Additionally, the Decatur climate requires specific attention to flashing details.
Don’t trust generic online calculators, which frequently exclude the ‘local mandates’ like disposal and code compliance.
Below is the 2025 breakdown for a standard 2,200 sq. ft. home in your zip code.
Table of Contents
Pricing in Decatur is stable with national averages. Expect predictable pricing without surcharges.
️ Climate-Specific Advice for Decatur
- Wind Uplift: Coastal codes require high-wind rated shingles (130 mph+). Ask about ‘sealed roof deck’ options.
1. The ‘Hidden Fees’ Breakdown
The following table breaks down the specific costs for a 2,200 sq. ft. architectural shingle roof in Decatur, AL, including labor, materials, and permitting fees. This equates to roughly $561 per square installed.
| Decatur Roofing Cost Elements | Cost (2,200 sq. ft.) |
|---|---|
| Materials Total | $5,489 |
| ⌞ Shingles, Underlayment, Nails | $4,719 |
| ⌞ Drip Edge & Flashing | $770 |
| Local Labor (Decatur) | $6,128 |
| Dump Fees | $521 |
| Permits | $222 |
| TOTAL ESTIMATE | $12,360 |
️ Local Permitting & Codes for Decatur
- Department: Building Department
- Address: 402 Lee St NE, 4th Floor, Decatur, AL 35601
- Phone: (256) 341-4570
[Image of roof layers diagram]

2. Material Comparison

| Material | Gross | Net (After ROI) |
|---|---|---|
| 3-Tab Asphalt | $10,583 | $4,234 |
| Architectural | $12,360 | $4,326 |
| Metal (Standing Seam) TAX CREDIT |
$24,733 | $3,710 |
| Clay/Concrete Tile | $30,067 | $7,517 |
A new roof isn’t just an expense; it’s an investment. The “Net Cost” column in our analysis subtracts the Resale Value Increase (ROI) from the upfront price.
Example: If you spend $20k but your home value goes up by $14k, your effective “Net Cost” is only $6k.
Decatur Hiring Checklist
Before signing a contract in AL, ensure your roofer provides:
- Proof of Insurance: Liability and Worker’s Comp are mandatory to protect you from lawsuits.
- Local References: Ask for 3 recent jobs in the Decatur area you can drive by.
- Written Warranty: Ensure you get both a manufacturer’s warranty (materials) and a workmanship warranty (labor).
- Licensing: Verify the contractor is registered with the Alabama Home Builders Licensure Board.
- Scope of Work: A detailed itemized list including cleanup and disposal fees.
Frequently Asked Questions
Currently, the average cost for an architectural shingle roof in Decatur ranges between $10,506 and $14,213 depending on accessibility and slope.
Yes, most roofing projects in AL require a permit. Based on current labor values, you should budget approximately $222 for permit fees in Decatur.
Most residential jobs in the Decatur area take 1-2 days. Seasonal demand can affect this timeline.
Typically yes, if the damage is caused by a sudden peril like hail. However, policies usually exclude normal wear and tear due to age. Check our Insurance Guide for details.
Affordability & Options
Worried about the upfront price? Many Decatur contractors offer financing for new roofs with flexible terms.
When to book in Decatur: Roofing crews are busiest from August to October. Booking a Spring installation often secures faster turnaround times.
Not sure how to pay? Compare HELOCs vs. Contractor options in our Roofing Financing Guide.
Never hire without comparing options.
Considering Decatur labor rates are variable, we recommend comparing at least 3 licensed pros.
Methodology: Our 2025 cost analysis for Decatur is based on a standard 2,200 sq. ft. roof geometry (4/12 pitch). Prices include local waste disposal fees, AL permit averages, and labor rates adjusted for the Decatur metro area. Material costs fluctuate weekly; always verify with a written contractor bid.
About the Data:
This guide was updated on December 28, 2025 by the RoofingData.us Research Team. Our costs are calculated using a proprietary algorithm that tracks real-time labor rates in AL and material costs from major suppliers (ABC Supply, Beacon). Learn more about our methodology.
