Roofing Cost Breakdown: Concord (2025 Data)

Homeowners in Concord need accurate pricing data, not guesses.
Local labor rates in Concord currently trend at 1.001x the national average.

Additionally, the Concord climate requires specific attention to underlayment codes.
Don’t trust national averages, which frequently ignore the ‘hidden fees’ like dump fees and permits.

Below is the 2025 breakdown for a standard 2,200 sq. ft. home in your zip code.

Local Alert: If you require 24-hour roof leak repair, local crews are on standby.

Pricing in Concord is stable with national averages. Expect predictable pricing without premiums.

️ Climate-Specific Advice for Concord

  • Wind Uplift: Coastal codes require high-wind rated shingles (130 mph+). Ask about ‘sealed roof deck’ options.
Tax Tip: Claim a Federal Tax Credit for 30% of material costs if you choose Energy Star rated shingles.

1. The ‘Hidden Fees’ Breakdown

The following table breaks down the specific costs for a 2,200 sq. ft. architectural shingle roof in Concord, NC, including labor, materials, and permitting fees. This equates to roughly $569 per square installed.

Concord Roofing Cost Elements Cost (2,200 sq. ft.)
Materials Total $5,489
Shingles, Underlayment, Nails $4,719
Drip Edge & Flashing $770
Local Labor (Concord) $6,298
Dump Fees $525
Permits $223
TOTAL ESTIMATE $12,535

️ Local Permitting & Codes for Concord

  • Department: Planning & Neighborhood
  • Address: 35 Cabarrus Ave W, Concord, NC 28025
  • Phone: (704) 920-5152

Get Directions

[Image of roof layers diagram]
Diagram of roof layers and flashing costs in Concord, NC

2. Material Comparison

Graph comparing asphalt vs metal roofing cost in Concord
Material Gross Net (After ROI)
3-Tab Asphalt $10,742 $4,297
Architectural $12,535 $4,388
Metal (Standing Seam)
TAX CREDIT
$25,079 $3,762
Clay/Concrete Tile $30,459 $7,615
What is “Net Cost”?
A new roof isn’t just an expense; it’s an investment. The “Net Cost” column in our analysis subtracts the Resale Value Increase (ROI) from the upfront price.

Example: If you spend $20k but your home value goes up by $14k, your effective “Net Cost” is only $6k.

Concord Hiring Checklist

Before signing a contract in NC, ensure your roofer provides:

  • Proof of Insurance: Liability and Worker’s Comp are mandatory to protect you from lawsuits.
  • Local References: Ask for 3 recent jobs in the Concord area you can drive by.
  • Written Warranty: Ensure you get both a manufacturer’s warranty (materials) and a workmanship warranty (labor).
  • Licensing: Verify the contractor is registered with the NCLBGC (North Carolina Licensing Board).
  • Scope of Work: A detailed itemized list including cleanup and disposal fees.

Frequently Asked Questions

How much does a new roof cost in Concord?
In 2025, the average cost for an architectural shingle roof in Concord ranges between $10,654 and $14,415 depending on accessibility and slope.
Do I need a permit for roofing in Concord?
Yes, most roofing projects in NC require a permit. Based on current labor values, you should budget approximately $223 for permit fees in Concord.
How long does roof replacement take?
Most residential jobs in the Concord area take 1-2 days. Weather conditions can affect this timeline.
Does home insurance cover roof replacement in Concord?
Typically yes, if the damage is caused by a sudden peril like wind. However, policies usually exclude normal wear and tear due to age. Check our Insurance Guide for details.

Affordability & Options

Check your eligibility for insurance coverage or low-interest payment plans.

When to book in Concord: Roofing crews are busiest from August to October. Booking a Spring installation often secures faster turnaround times.

Not sure how to pay? Compare HELOCs vs. Contractor options in our Roofing Financing Guide.

Smart homeowners compare multiple bids.
Considering Concord labor rates are volatile, we recommend comparing at least 3 licensed pros.

Compare Nearby Locations:
See roofing rates for Winston-Salem, Rocky Mount, Jacksonville.

Methodology: Our 2025 cost analysis for Concord is based on a standard 2,200 sq. ft. roof geometry (4/12 pitch). Prices include local waste disposal fees, NC permit averages, and labor rates adjusted for the Concord metro area. Material costs fluctuate weekly; always verify with a written contractor bid.

About the Data:

This guide was updated on December 28, 2025 by the RoofingData.us Research Team. Our costs are calculated using a proprietary algorithm that tracks real-time labor rates in NC and material costs from major suppliers (ABC Supply, Beacon). Learn more about our methodology.