The average cost to replace a roof in Scranton–Wilkes-Barre is often higher than online estimators suggest.
Contractor fees in Scranton–Wilkes-Barre currently sit at 1.028x the national average.
Additionally, the Scranton–Wilkes-Barre climate requires specific attention to flashing details.
Don’t trust generic online calculators, which frequently exclude the ‘local mandates’ like disposal and code compliance.
Below is the 2025 breakdown for a standard 2,200 sq. ft. home in your zip code.
Table of Contents
Pricing in Scranton–Wilkes-Barre is consistent with national averages. Expect standard pricing without premiums.
️ Climate-Specific Advice for Scranton–Wilkes-Barre
- Ice Dams: Scranton–Wilkes-Barre winters can be harsh. Ensure your bid includes Ice & Water Shield at the eaves and valleys.
1. The ‘Hidden Fees’ Breakdown
The following table breaks down the specific costs for a 2,200 sq. ft. architectural shingle roof in Scranton–Wilkes-Barre, PA, including labor, materials, and permitting fees. This equates to roughly $587 per square installed.
| Scranton–Wilkes-Barre Roofing Cost Elements | Cost (2,200 sq. ft.) |
|---|---|
| Materials Total | $5,703 |
| ⌞ Shingles, Underlayment, Nails | $4,719 |
| ⌞ Ice & Water Shield (Code Req.) | $214 |
| ⌞ Drip Edge & Flashing | $770 |
| Local Labor (Scranton–Wilkes-Barre) | $6,468 |
| Dump Fees | $528 |
| Permits | $226 |
| TOTAL ESTIMATE | $12,925 |
[Image of roof layers diagram]
2. Material Comparison
| Material | Gross | Net (After ROI) |
|---|---|---|
| 3-Tab Asphalt | $11,116 | $4,447 |
| Architectural | $12,925 | $4,524 |
| Metal (Standing Seam) TAX CREDIT |
$25,640 | $3,846 |
| Clay/Concrete Tile | $31,066 | $7,767 |
A new roof isn’t just an expense; it’s an investment. The “Net Cost” column in our analysis subtracts the Resale Value Increase (ROI) from the upfront price.
Example: If you spend $20k but your home value goes up by $14k, your effective “Net Cost” is only $6k.
Scranton–Wilkes-Barre Hiring Checklist
Before signing a contract in PA, ensure your roofer provides:
- Proof of Insurance: Liability and Worker’s Comp are mandatory to protect you from lawsuits.
- Local References: Ask for 3 recent jobs in the Scranton–Wilkes-Barre area you can drive by.
- Written Warranty: Ensure you get both a manufacturer’s warranty (materials) and a workmanship warranty (labor).
- Licensing: Verify the contractor is registered with the Pennsylvania Attorney General (HIC Registration).
- Scope of Work: A detailed itemized list including cleanup and disposal fees.
Frequently Asked Questions
In 2025, the average cost for an architectural shingle roof in Scranton–Wilkes-Barre ranges between $10,986 and $14,863 depending on accessibility and slope.
Yes, most roofing projects in PA require a permit. Based on current labor values, you should budget approximately $226 for permit fees in Scranton–Wilkes-Barre.
Most residential jobs in the Scranton–Wilkes-Barre area take 1-2 days. Seasonal demand can affect this timeline.
Typically yes, if the damage is caused by a sudden peril like storm debris. However, policies usually do not cover normal wear and tear due to age. Check our Insurance Guide for details.
Affordability & Options
Ask about roof replacement financing to spread the cost over 5-10 years.
When to book in Scranton–Wilkes-Barre: Spring and Summer are peak seasons. For the best pricing, try to book in late Fall (before the freeze) when crews are looking to fill gaps.
Not sure how to pay? Compare HELOCs vs. Contractor options in our Roofing Financing Guide.
Don’t settle for the first bid.
Given that Scranton–Wilkes-Barre labor rates are volatile, we recommend comparing at least 3 licensed pros.
Methodology: Our 2025 cost analysis for Scranton–Wilkes-Barre is based on a standard 2,200 sq. ft. roof geometry (4/12 pitch). Prices include local waste disposal fees, PA permit averages, and labor rates adjusted for the Scranton–Wilkes-Barre metro area. Material costs fluctuate weekly; always verify with a written contractor bid.
About the Data:
This guide was updated on December 28, 2025 by the RoofingData.us Research Team. Our costs are calculated using a proprietary algorithm that tracks real-time labor rates in PA and material costs from major suppliers (ABC Supply, Beacon). Learn more about our methodology.